15 Best Smith Machines with Weight Bench, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best smith machines with weight bench requires balancing your available floor space against cable versatility and total frame capacity. We compared 15 systems using only the specifications published on each product listing to evaluate their functional training capabilities.
The Major Fitness Drone2 Smith Machine earns our top spot because of its 2,000-pound frame capacity, 1:1 pulley system, and included aluminum pulleys. This guide helps you decide which bundled system matches your ceiling clearance, resistance preferences, and home workout demands.
Quick picks
The best fit for you
- You want a high frame capacity with 1:1 pulleys Major Fitness Drone2 Smith Machine Its 2,000-pound capacity frame and 1:1 pulley system support heavy lifting without extra accessory purchases.
- You train with bumper plates and selectorized stacks Mikolo Horus Dual Stack Smith Machine This unit pairs bumper plate compatibility with 256 pounds of dual selectorized weight stacks.
- You want multi-directional bar travel with included plates RitFit 3D Smith Machine with Weight Bench The 13-gauge steel frame provides 3D bar travel and includes both a weight bench and plates.
- You want dedicated leg press and extension stations MiM USA Hercules Smith Machine with Bench It includes dedicated leg press and leg extension attachments alongside the weight bench.
Our 15 picks
Major Fitness Drone2 Smith Machine
Best for: heavy lifters wanting complete bench and cable setups
- Attachments
- Weight Bench, Aluminum Pulleys (what this guide is about)
- Weight Capacity
- 2,000 lbs
- Upright Dimensions
- 2 x 2 inches
- Pulley Ratio
- 1:1
- Use
- Squats
- Dimensions
- 4.92 × 8.66 × 81.5 inches
The Major Fitness Drone2 is an all-in-one squat rack and Smith machine that includes a weight bench and aluminum pulleys. It features 2-by-2-inch steel uprights and supports up to 2,000 pounds. The cable crossover operates on a 1:1 pulley ratio for heavy, direct resistance. This setup suits you if you need a multi-station rack with bundled bench accessories for heavy squats, bench presses, and cable pull exercises at home.
Pros
- 2,000 lb total frame weight capacity
- 1:1 pulley ratio provides true-weight cable resistance
- Bundled weight bench and aluminum pulley set
- Includes accessories like dip handles, lat pulldown bar, and tricep rope
Cons
- Built on 2x2-inch uprights rather than heavier 3x3-inch steel
- Vertical height reaches 81.5 inches, requiring sufficient overhead space
Good fit if
- You want a 1:1 pulley ratio for heavier cable training resistance.
- You need a complete setup that includes a weight bench and cable attachments.
- You have at least 81.5 inches of ceiling clearance for rack installation.
Skip if
- You prefer larger 3x3-inch uprights for commercial rack accessories.
- You want a system with integrated selectorized weight stacks.
Verdict: Major Fitness Drone2 Smith Machine with Bench delivers a 2,000-pound capacity frame with a 1:1 pulley system and complete bench bundle. It gives you a comprehensive strength station without needing separate accessory purchases.
RitFit M1 Pro Smith Machine with Weight Stack
Best for: Lifters seeking dual weight stacks and bench
- Attachments
- Weight Bench, Smith Machine, Weight Stacks (what this guide is about)
- Weight Capacity
- 1,850 lbs
- Upright Dimensions
- 2" x 2"
- Weight Stack
- 286 lbs
- Adjustment Levels
- 12
View on Amazon: RitFit M1 Pro Smith Machine with Weight Stack
This package pairs an 85.2-inch Smith machine and cable system with an included weight bench. Built around 2-by-2-inch steel uprights with 12 adjustment levels, it features a 286-pound dual selectorized weight stack and an overall 1,850-pound weight capacity. You get linear bearings for the Smith bar, integrated plate and bar storage, and aluminum cable pulleys, making it a versatile setup if you prefer pin-select stacks for cable work.
Pros
- Includes 286 lb total dual weight stacks expandable up to 902 lbs combined
- Linear bearing Smith bar mechanism paired with bottom spring shock absorbers
- Frame supports an overall 1,850 lb total weight capacity
- Integrated gear storage with 6 weight plate pegs and 3 barbell holders
Cons
- Uses 2-by-2-inch uprights rather than heavy 3-by-3-inch commercial steel
- Provides only 12 adjustment levels along the uprights
- Ships in multiple packages that may arrive at different times
Good fit if
- You want built-in selectorized weight stacks without buying extra plate-load adapters.
- You need a complete package that includes both a weight bench and cable attachments.
- You prefer a Smith machine built with smooth linear bearings and built-in storage.
Skip if
- You require standard 3-by-3-inch uprights to fit existing commercial attachments.
- You need more than 12 adjustment levels for fine-tuned positioning.
- You have low ceilings unable to clear the 85.2-inch frame height.
Verdict: RitFit M1 Pro Smith Machine with Weight Stack and Bench delivers an all-in-one lifting station combining dual weight stacks, smooth linear bearings, and generous built-in storage. It provides a heavy 1,850-pound capacity and a dedicated bench for lifters who prioritize cable variety in a compact footprint.
Mikolo Horus Dual Stack Smith Machine
Best for: bumper plate training with dual weight stacks
- Attachments
- Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine, Weight Stacks, Dual Pulley System, Pulley System (what this guide is about)
- Weight Capacity
- 2,200 lb
- Upright Dimensions
- 50 x 50 mm (2" x 2")
- Pulley Ratio
- 2:1
- Weight Stack
- 256 lb
- Plate Type
- Bumper
This Mikolo Smith machine combines an all-in-one power cage with a 256-pound dual weight stack system and included weight bench setup. Built on 2-inch by 2-inch steel uprights with an overall 2,200-pound frame capacity, it pairs a 2:1 pulley ratio functional trainer with dedicated lat pulldown and low row stations. It suits you if you want a bumper-plate-compatible Smith system with dual selectorized stacks for uninterrupted partner or circuit training.
Pros
- Dual weight stack system with 256 lb total capacity (128 lb per side)
- Heavy-duty 2,200 lb total frame weight capacity
- Functional trainer features a 2:1 pulley ratio and 15° elevated cable pivot
- Includes six integrated weight storage pins and four attachment hooks
Cons
- Uprights are 2" x 2" (50 x 50 mm), limiting fit with 3" x 3" aftermarket attachments
- Requires at least 87 inches of ceiling height clearance
- Individual cable stack weight tops out at 128 lb per side
Good fit if
- You plan to use bumper plates and need integrated frame storage pins.
- You want dual independent weight stacks for supersets or simultaneous partner training.
- You have ceiling clearance to accommodate an 87-inch tall frame.
Skip if
- You require single-cable resistance exceeding the 128 lb per-side stack limit.
- You already own standard 3" x 3" power rack accessories.
- You have ceiling clearance under 87 inches.
Verdict: Mikolo Smith Machine with Dual Weight Stacks delivers a versatile power cage setup with 256 pounds of selectorized weight and bumper plate compatibility. Its comprehensive multi-station layout handles compound barbell lifts and cable movements within a single footprint.
DONOW Smith Machine with Weight Stacks & Bench
Best for: home gyms prioritizing weight stacks and hip thrusts
- Attachments
- Weight Bench, Cable Crossover, Smith Machine, Weight Stacks (what this guide is about)
- Pulley Ratio
- 2:1 (switchable to 1:1)
- Weight Stack
- 308 lbs
View on Amazon: DONOW Smith Machine with Weight Stacks & Bench
The DONOW Smith Machine combines a guided barbell, squat station, and 308-pound steel weight stack system with an included weight bench. You get dual pulleys that switch between a 2:1 and 1:1 ratio, matching different resistance needs for flies or pulldowns. It also includes an integrated hip thrust station with a padded back cushion. This setup suits you if you want built-in plate-free cable resistance and dedicated glute training in one unit.
Pros
- 308 lb built-in steel weight stacks providing up to 154 lb resistance per side
- Dual pulley system switchable between 2:1 and 1:1 resistance ratios
- Dedicated hip thrust station with a padded back cushion
- Includes weight bench and built-in weight storage pegs
Cons
- Tall frame requires at least 88.3 inches of ceiling clearance
- Maximum cable resistance caps at 154 lbs for unilateral exercises
Good fit if
- You want built-in weight stacks instead of plate-loaded cable carriages.
- You need a dedicated hip thrust setup with a padded back rest.
- You want variable 2:1 and 1:1 pulley ratios for different cable workouts.
Skip if
- You have a training space with ceiling height under 88.3 inches.
- You require more than 154 pounds of unilateral cable resistance.
Verdict: DONOW Smith Machine with Weight Stacks & Bench provides selectorized resistance and a dedicated hip thrust station in a single system. It delivers versatile cable ratios and guided barbell lifting without requiring manual plate loading for cable movements.
Major Fitness Drone MAX V Smith Machine
Best for: Dual-ratio cable workouts with a weight bench
- Attachments
- Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine, Weight Stacks (what this guide is about)
- Weight Capacity
- 2500 lbs
- Upright Dimensions
- 2 x 2 inches
- Steel Thickness
- 14-gauge
- Pulley Ratio
- 1:1 & 2:1
- Adjustment Levels
- 18
The Major Fitness Drone MAX V combines a 2x2-inch upright power cage, Smith machine, dual-ratio cable pulleys, and an included weight bench. You get a 2,500-pound total frame capacity alongside dual 1:1 and 2:1 pulley ratios for variable cable resistance. With 18 adjustment levels spanning up to 71 inches and an 80.7-inch frame height, this setup suits lifters seeking complete free-weight and cable training.
Pros
- Dual 1:1 and 2:1 aluminum pulley ratios
- Frame supports up to 2,500 lbs total capacity
- 18 adjustment positions for J-cups and pulleys
- Smith bar rated for 400 lbs dynamic and 750 lbs static load
Cons
- 2x2-inch uprights limit compatibility with 3x3 accessories
- 14-gauge steel is thinner than 11-gauge commercial frames
- Smith bar dynamic capacity is limited to 400 lbs
Good fit if
- You want switchable 1:1 and 2:1 pulley ratios for cable work.
- You need a multi-station rack bundled with a weight bench.
- You train in a space with at least 81 inches of ceiling height.
Skip if
- You require heavier 11-gauge steel construction.
- You already own attachments designed for 3x3-inch uprights.
- You lift more than 400 lbs dynamically on the Smith bar.
Verdict: Major Fitness Drone MAX V Smith Machine delivers flexible dual-ratio cable exercises and a dedicated weight bench on an 80.7-inch frame. It suits lifters who want varied functional training without exceeding a 400-pound dynamic Smith bar capacity.
RitFit 3D Smith Machine with Weight Bench
Best for: complete home gyms wanting 3D bar travel
- Attachments
- Weight Bench, Smith Machine, Weight Stacks, Weight Plates (what this guide is about)
- Weight Capacity
- 2000 lbs
- Upright Dimensions
- 2.36" x 2.36"
- Steel Thickness
- 13-gauge
- Weight Stack
- 286.6 lbs
- Adjustment Levels
- 16
This all-in-one station pairs a multi-directional 3D Smith machine with an included weight bench, a 286.6-pound selectorized weight stack, and 230 pounds of weight plates. Built from 2.36 by 2.36-inch 13-gauge steel uprights, the frame supports up to 2,000 pounds across 16 adjustment levels. You get both guided tracking and free-weight path freedom, making it suitable if you want commercial-style stack resistance and complete plate packages at home.
Pros
- 286.6-pound integrated selectorized weight stack with pin adjustment
- Multi-directional 3D barbell travel with integrated safety hooks
- Package includes a dedicated weight bench and 230 pounds of weight plates
- 2.36 by 2.36-inch 13-gauge steel frame rated for 2,000 pounds
Cons
- Delivery arrives split across 13 separate boxes
- Upright posts provide 16 adjustment positions
- Frame height requires at least 86.1 inches of vertical clearance
Good fit if
- You want a Smith machine with multi-directional barbell movement instead of a fixed vertical path.
- You want a bundled bench, 230 pounds of plates, and a 286.6-pound weight stack in one system.
- You have at least 86.1 inches of ceiling clearance and 22.8 square feet of floor space.
Skip if
- You have low ceilings below 86.1 inches.
- You want to avoid managing a delivery split across 13 separate boxes.
Verdict: RitFit 3D Smith Machine with Weight Bench delivers heavy-duty 13-gauge steel construction with multi-directional bar travel and an integrated selectorized stack. It gives you a complete lifting station with included bench and plates.
Royal Fitness Smith Machine Home Gym
Best for: high-ceiling home gyms needing multi-station versatility
- Attachments
- Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine (what this guide is about)
- Steel Thickness
- 2 mm
The Royal Fitness Smith Machine Home Gym combines a power cage, integrated Smith bar, cable crossover, and lat pulldown into an 87.4-inch tall frame. Built from 2 mm thick steel, it measures 78.7 by 64.1 inches across your floor space. You get height-adjustable pulleys, adjustable safety catches, and package options bundling a weight bench. It suits you if you want a complete strength setup in a single dedicated footprint.
Pros
- Built with 2 mm thick steel frame construction
- Combines Smith machine, power cage, cable crossover, and lat pulldown
- Height-adjustable cable pulleys and safety catches
- Multiple configuration options including weight bench and weight plates
Cons
- Requires high ceiling clearance to fit its 87.4-inch height
- Demands significant floor area measuring 78.7 by 64.1 inches
- Ships unassembled across three separate shipping boxes
Good fit if
- You have high ceilings that clear the 87.4-inch total height.
- You want a multi-function station made with 2 mm thick steel.
- You want an all-in-one cage package that includes a weight bench.
Skip if
- You train in a room or basement with ceilings under 88 inches.
- You lack the floor space required for a 78.7 by 64.1-inch footprint.
Verdict: Royal Fitness Smith Machine Home Gym delivers versatile strength training through 2 mm steel construction, adjustable cable pulleys, and bundled weight bench configurations. It serves as a comprehensive multi-station setup if your training area accommodates its vertical footprint.
Megastar Fitness Smith Machine with Weight Bench
Best for: complete plate-loaded training with included bench
- Attachments
- Weight Bench, Cable Crossover, Smith Machine, Pulley System (what this guide is about)
- Pulley Ratio
- 1:1
- Use
- Squats
- Dimensions
- 87 × 50 × 83 inches
View on Amazon: Megastar Fitness Smith Machine with Weight Bench
The Megastar Fitness Smith Machine with Weight Bench combines a linear-bearing Smith bar, a 1:1 pulley system, and an included weight bench into an 87-inch-long by 50-inch-wide footprint. Standing 83 inches tall, this multi-station unit includes dual loading frames that allow two lifters to exercise simultaneously. It suits you if you need a full cable crossover and bench setup in a single package.
Pros
- Direct 1:1 cable pulley ratio
- Precision linear bearings with 16-bearing pulley design
- Dual loading frame supports two simultaneous lifters
- Includes weight bench, dip handles, landmine, and footrest
Cons
- Requires 87 inches of floor depth
- Plate-loaded resistance lacks selectorized weight stacks
Good fit if
- You want a bundled weight bench and attachment package.
- You prefer a 1:1 pulley ratio for cable exercises.
- You train with a partner and need dual-station capability.
Skip if
- You require pin-select weight stacks instead of weight plates.
- You have limited floor space measuring under 87 inches in length.
Verdict: Megastar Fitness Smith Machine with Weight Bench provides a multi-functional lifting station with a 1:1 pulley ratio, linear bearings, and an included bench. Its dual loading stations allow two people to lift at the same time.
EonfitOmni Power Rack with Weight Bench
Best for: versatile dual-ratio cable and free-weight training
- Attachments
- Weight Bench, Cable Crossover (what this guide is about)
- Upright Dimensions
- 2" x 2"
- Steel Thickness
- 14-gauge
- Pulley Ratio
- 1:1, 1:2
- Use
- Squats
- Dimensions
- 61 × 62.5 × 85 inches
This power rack setup combines a 14-gauge steel frame with an included weight bench for home lifting. You get 2-by-2-inch uprights rated for 1,200 pounds alongside 360-degree rotating cable arms with selectable 1:1 and 1:2 pulley ratios. With an 85-inch height and a footprint of 62.5 by 61 inches, it gives you free-weight barbell stations, cable crossovers, and landmine work in one self-contained footprint.
Pros
- Switchable 1:1 and 1:2 cable pulley ratios with 360-degree rotating arms
- 1,200-pound rack weight capacity
- Comes with weight bench, dip handles, landmine, and pull-up bar
- Includes barbell hanger and plate storage pins
Cons
- Built with 14-gauge 2-by-2-inch uprights instead of 11-gauge steel
- Upright adjustment holes feature 3-inch spacing
- Requires 85 inches of vertical ceiling clearance
Good fit if
- You want a bundled power rack package that includes a weight bench.
- You want cable arms that can alternate between 1:1 and 1:2 resistance ratios.
- You have at least 85 inches of vertical ceiling space.
Skip if
- You need heavier 11-gauge 3-by-3-inch commercial-grade uprights.
- You prefer narrower 1-inch or 2-inch hole spacing for safety adjustments.
Verdict: EonfitOmni Power Rack with Weight Bench offers 1,200 pounds of capacity with versatile dual-ratio rotating cable arms and multiple training accessories. It provides an all-in-one free-weight and cable workstation for home gym owners with standard ceiling heights.
SunHome All-in-One Smith Machine with Weight Stack
Best for: heavy lifters wanting maximum frame weight capacity
- Attachments
- Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine (what this guide is about)
- Weight Capacity
- 2000LBS
- Steel Thickness
- 2mm
- Weight Stack
- 120LBS
- Use
- Squats
- Dimensions
- 72 × 60 × 90 inches
View on Amazon: SunHome All-in-One Smith Machine with Weight Stack
The SunHome Smith Machine combines a power cage, cable crossover, butterfly press arms, and an adjustable bench with wheels. Built with 2mm thick steel, the frame supports up to 2,000 lbs and weighs 410 lbs for overall stability. It includes a 120 lb weight stack that you can expand using plate holders. This setup fits lifters who want high total frame capacity and integrated bench adjustment options.
Pros
- 2,000 lb overall weight capacity with 2mm steel frame
- Included bench features 5 back positions, 4 seat positions, and transport wheels
- Built-in 120 lb weight stack with plate holders for adding weight
- Integrated storage includes 6 plate posts, 1 barbell post, and accessory hooks
Cons
- Standard built-in weight stack is limited to 120 lbs before adding plates
- Overall height reaches up to 90 inches, requiring tall ceiling clearance
Good fit if
- You want a 2,000 lb rated frame that includes a multi-position bench on wheels.
- You want built-in plate and barbell storage directly on the cage.
- You want the option to supplement a selectorized stack with free weight plates.
Skip if
- You have a low ceiling under 90 inches.
- You require a heavier selectorized weight stack without loading loose plates.
Verdict: SunHome 2,000 lb Smith Machine with Bench provides a 2,000 lb rated station paired with a 9-position mobile bench and integrated plate storage. It delivers broad utility if your space accommodates its 90-inch height.
Major Fitness Drone3 Smith Machine
Best for: versatile cable ratios and high weight capacity
- Attachments
- Weight Bench, Cable Crossover, Smith Machine (what this guide is about)
- Weight Capacity
- 2,500 lbs
- Upright Dimensions
- 2 x 2 inches
- Pulley Ratio
- 2:1 or 1:1
- Adjustment Levels
- 19
- Use
- Squats
The Major Fitness Drone3 combines a 2x2-inch steel power cage, a linear-bearing Smith bar, and an adjustable cable crossover with a weight bench. Its 2,500-pound total capacity supports heavy lifts, while the dual pulleys let you choose between 2:1 and 1:1 ratios. With 19 adjustment levels and multiple pull-up stations, this setup suits lifters who want a heavy-duty, versatile Smith machine station for full-body strength training at home.
Pros
- Total weight capacity of 2,500 pounds on 2x2-inch steel uprights
- Dual-pulley crossover supports selectable 2:1 and 1:1 cable ratios
- Smooth linear bearing Smith bar with 19 adjustment settings
- Includes chest, high, low, and T-bar pull-up attachments
Cons
- Wide 78.1-inch width requires substantial floor space
- Upright adjustment spacing is relatively wide at 3.11 inches
- Uses 2x2-inch uprights rather than larger 3x3-inch commercial tubing
Good fit if
- You want the option to switch between 1:1 and 2:1 cable pulley ratios
- You need a high 2,500-pound load capacity for heavy lifting
- You have at least 85.3 inches of vertical ceiling clearance
Skip if
- You have low ceilings or limited room width under 78.1 inches
- You prefer tight 1-inch or 2-inch upright hole spacing over 3.11-inch intervals
Verdict: Major Fitness Drone3 Smith Machine with Bench delivers exceptional 2,500-pound strength and dual cable ratios in a single cage. It provides a sturdy, complete lifting platform if you have the floor space and ceiling height to house it.
Megastar Fitness 2x3 Smith Machine with Bench
Best for: heavy lifting with comprehensive included accessories
- Attachments
- Weight Bench, Smith Machine, Pulley System (what this guide is about)
- Weight Capacity
- 2000 lbs
- Upright Dimensions
- 2" x 3"
- Dimensions
- 86.6 × 59.9 × 84.5 inches
View on Amazon: Megastar Fitness 2x3 Smith Machine with Bench
The Megastar Fitness Smith Machine with Bench pairs an integrated Smith barbell and cable pulley system with an included weight bench. Built from 2-inch by 3-inch steel tubing, the frame supports up to 2,000 pounds. It stands 84.5 inches tall with an 86.6 by 59.9-inch footprint. This setup suits you if you want a complete strength station with 18 included attachments like dip bars, band pegs, and a landmine.
Pros
- 2,000-pound total frame weight capacity
- Heavy-duty 2-inch by 3-inch steel tube construction
- Package includes a weight bench and 18 training attachments
- Backed by 2-year support and lifetime part replacement
Cons
- Requires 84.5 inches of vertical ceiling clearance
- Occupies a large footprint measuring 86.6 inches long by 59.9 inches wide
Good fit if
- You need a heavy-duty rack made from 2-inch by 3-inch steel tubing.
- You want an integrated bench and 18 attachments bundled in one package.
- You require a high weight capacity of up to 2,000 pounds.
Skip if
- You have low ceilings under 84.5 inches.
- You have limited floor space that cannot fit an 86.6-inch long frame.
Verdict: Megastar Fitness 2x3 Smith Machine with Bench provides a 2,000-pound capacity frame built on 2x3 steel for dedicated home training. It combines a Smith bar, cable station, included bench, and 18 accessories into a single setup.
Goimu Smith Machine with Weight Bench
Best for: High-capacity plate-loaded training with included bench
- Attachments
- Weight Bench, Lat Pulldown, Smith Machine, Dual Pulley System, Pulley System (what this guide is about)
- Weight Capacity
- 2,500 lbs
- Upright Dimensions
- 2" × 2"
- Adjustment Levels
- 33
- Use
- Squats
This all-in-one setup pairs a guided Smith bar and dual-pulley cable system with an included weight bench. Built on 2-inch by 2-inch steel uprights, the frame supports up to 2,500 pounds and offers 33 laser-etched height positions. It suits you if you want plate-loaded cable work, compound barbell training, and dedicated ground-level plate storage without purchasing separate bench attachments.
Pros
- 2,500-pound total frame weight capacity
- 33 laser-etched upright adjustment positions
- Anti-derailment pulley guards keep cables tracked
- Includes weight bench, landmine, dip handles, and safety spotters
Cons
- Uses 2-inch by 2-inch uprights rather than 3-inch steel
- Plate-loaded pulley system lacks selectorized weight stacks
Good fit if
- You need a complete package that includes a weight bench and safety accessories.
- You want 33 adjustment levels for precise J-hook and bar positioning.
- You prefer horizontal ground-level plate storage over upright pegs.
Skip if
- You prefer heavier 3-inch by 3-inch commercial upright dimensions.
- You want selectorized weight stacks instead of manual plate loading.
Verdict: Goimu Smith Machine with Weight Bench delivers a 2,500-pound capacity frame and 33 adjustment points alongside a bundled utility bench. Its 2-inch uprights and plate-loaded design provide an expansive strength station for home lifters.
XGSW Smith Machine with Weight Bench
Best for: compact home workouts needing an included bench
- Attachments
- Weight Bench, Cable Crossover, Smith Machine (what this guide is about)
- Use
- Squats
This setup pairs a commercial-grade steel Smith machine with a weight bench and a dual-pulley cable crossover system. You get dedicated hardware for squats, bench presses, and pull-ups, backed by a 24-month frame warranty and 12-month accessory coverage. Available in heights ranging from 84.6 to 88 inches, it suits lifters who want a full-body station with bundled bench support and guided barbell tracking in compact home gym spaces.
Pros
- Includes dedicated weight bench, Smith bar, and dual-pulley cable crossover
- Commercial-grade steel frame with 24-month structural warranty
- Numbered parts and installation video provided for assembly
- Multiple frame heights available at 84.6, 87.2, and 88 inches
Cons
- Maximum weight capacity ratings are not listed in the specifications
- Entire multi-component system ships packed into a single box
Good fit if
- You need an all-in-one station combining a Smith track, dual cables, and a weight bench.
- You want assembly guidance via numbered parts and step-by-step video instructions.
- You have ceiling clearance to fit heights between 84.6 and 88 inches.
Skip if
- You require verified barbell and frame maximum load ratings prior to purchase.
- You cannot manage freight delivery arriving in a single heavy container.
Verdict: XGSW Smith Machine with Weight Bench delivers a versatile lifting station with dual cables and bench utility, backed by a two-year frame warranty. Its height options make it adaptable to standard home gym spaces despite unlisted maximum load limits.
MiM USA Hercules Smith Machine with Bench
Best for: dedicated leg press and extension training
- Attachments
- Weight Bench, Leg Press, Leg Extension (what this guide is about)
- Dimensions
- 67 × 87 × 91 inches
- Weight
- 805 pounds
The MiM USA Hercules Smith Machine with Bench combines a functional trainer, power cage, vertical leg press, and adjustable weight bench into a single unit. It measures 87 inches wide, 67 inches long, and 91 inches tall, offering an 800-pound maximum weight capacity. This system suits you if you need dedicated leg press attachments alongside an included bench and have enough room for a large footprint.
Pros
- Includes adjustable weight bench, vertical leg press, and leg extension attachments
- Lifetime warranty on the reinforced steel frame
- Total weight capacity of 800 pounds including user weight
- Built-in storage for barbells, weight plates, and cable attachments
Cons
- Tall 91-inch height requires significant ceiling clearance
- Large footprint measures 87 inches wide by 67 inches long
- Heavy delivery consisting of 12 separate packages
Good fit if
- You want vertical leg press and leg extension attachments with your cage.
- You have high ceilings that can clear a 91-inch machine.
- You need an all-in-one station with an included adjustable bench.
Skip if
- You have low ceiling heights below 91 inches.
- You have limited floor space for an 87-inch wide frame.
- You want a lightweight rack that is easy to move.
Verdict: MiM USA Hercules Smith Machine with Bench delivers a heavy-duty training station with dedicated leg press functionality and an included bench. Its 91-inch height and broad frame require substantial ceiling clearance and floor space.
Specifications side by side
| Spec | Major Fitness Drone2 Smith Machine | RitFit M1 Pro Smith Machine with Weight Stack | Mikolo Horus Dual Stack Smith Machine | DONOW Smith Machine with Weight Stacks & Bench | Major Fitness Drone MAX V Smith Machine | RitFit 3D Smith Machine with Weight Bench | Royal Fitness Smith Machine Home Gym | Megastar Fitness Smith Machine with Weight Bench | EonfitOmni Power Rack with Weight Bench | SunHome All-in-One Smith Machine with Weight Stack | Major Fitness Drone3 Smith Machine | Megastar Fitness 2x3 Smith Machine with Bench | Goimu Smith Machine with Weight Bench | XGSW Smith Machine with Weight Bench | MiM USA Hercules Smith Machine with Bench |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Weight Capacity | 2,000 lbs | 1,850 lbs | 2,200 lb | not specified | 2500 lbs | 2000 lbs | not specified | not specified | not specified | 2000LBS | 2,500 lbs | 2000 lbs | 2,500 lbs | not specified | not specified |
| Upright Dimensions | 2 x 2 inches | 2" x 2" | 50 x 50 mm (2" x 2") | not specified | 2 x 2 inches | 2.36" x 2.36" | not specified | not specified | 2" x 2" | not specified | 2 x 2 inches | 2" x 3" | 2" × 2" | not specified | not specified |
| Steel Thickness | not specified | not specified | not specified | not specified | 14-gauge | 13-gauge | 2 mm | not specified | 14-gauge | 2mm | not specified | not specified | not specified | not specified | not specified |
| Pulley Ratio | 1:1 | not specified | 2:1 | 2:1 (switchable to 1:1) | 1:1 & 2:1 | not specified | not specified | 1:1 | 1:1, 1:2 | not specified | 2:1 or 1:1 | not specified | not specified | not specified | not specified |
| Weight Stack | not specified | 286 lbs | 256 lb | 308 lbs | not specified | 286.6 lbs | not specified | not specified | not specified | 120LBS | not specified | not specified | not specified | not specified | not specified |
| Adjustment Levels | not specified | 12 | not specified | not specified | 18 | 16 | not specified | not specified | not specified | not specified | 19 | not specified | 33 | not specified | not specified |
| Included Plates | not specified | not specified | not specified | not specified | not specified | 230 lbs | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Attachments | Weight Bench, Aluminum Pulleys | Weight Bench, Smith Machine, Weight Stacks | Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine, Weight Stacks, Dual Pulley System, Pulley System | Weight Bench, Cable Crossover, Smith Machine, Weight Stacks | Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine, Weight Stacks | Weight Bench, Smith Machine, Weight Stacks, Weight Plates | Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine | Weight Bench, Cable Crossover, Smith Machine, Pulley System | Weight Bench, Cable Crossover | Weight Bench, Cable Crossover, Lat Pulldown, Smith Machine | Weight Bench, Cable Crossover, Smith Machine | Weight Bench, Smith Machine, Pulley System | Weight Bench, Lat Pulldown, Smith Machine, Dual Pulley System, Pulley System | Weight Bench, Cable Crossover, Smith Machine | Weight Bench, Leg Press, Leg Extension |
| Use | Squats | not specified | not specified | not specified | Squats | not specified | not specified | Squats | Squats | Squats | Squats | not specified | Squats | Squats | not specified |
| Plate Type | not specified | not specified | Bumper | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Dimensions | 4.92 × 8.66 × 81.5 inches | not specified | not specified | not specified | not specified | 68.8 × 47.8 × 86.1 inches | not specified | 87 × 50 × 83 inches | 61 × 62.5 × 85 inches | 72 × 60 × 90 inches | not specified | 86.6 × 59.9 × 84.5 inches | not specified | not specified | 67 × 87 × 91 inches |
| Weight | 65 pounds | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 250 pounds | not specified | not specified | not specified | not specified | not specified | 805 pounds |
| Color | Black | Red | Black | Premium Steel Weight | SILVER | RED | Black | Red | Black | Black | Black | Black | Black | Red | Black |
| Size | not specified | Package (With Weight Stack + Bench) | not specified | not specified | not specified | not specified | not specified | T35 Smith Machine with Bench and Pully | BENCH PACKAGE | not specified | 78.1"W x 45.9"D x 85.3"H | P107 Smith Machine with Bench | SM4 with Bench | L05 Power Cage+bench | X-Large |
| Model | not specified | RF-M1PRO | SM02 | not specified | not specified | not specified | not specified | not specified | E2 | sh | not specified | not specified | SM01 | Home Gym | 1001 |
If you also prepare food at home, you can review specifications for the best bread machines for bread.
Key Specs for Choosing a Smith Machine
-
Measure Vertical Ceiling Clearance
Check your ceiling height before choosing an upright cage. Height specs across these machines range from 80.7 inches up to 91 inches. If you train in a basement with low clearance, an 81.5-inch frame fits tighter spaces. Taller designs demand extra overhead clearance for installation and pull-up movements. For instance, the MiM USA Hercules Smith Machine requires 91 inches of vertical clearance. Measure your ceiling joists before selection.
-
Compare Frame Weight Capacities
Frames feature ratings between 1,200 pounds and 2,500 pounds. A 1,200-pound frame suits standard strength work and progressive overload. If you plan to load maximum weight plates onto the frame or use multiple stations simultaneously, choose a higher structural threshold. The Goimu Smith Machine provides a 2,500-pound capacity frame with 33 adjustment points. Review your lifting numbers and select a frame rating that supports your long-term strength goals.
-
Evaluate Steel Tubing Dimensions
Upright geometry determines structural rigidity and attachment fit. Look at the upright size and gauge measurements on the specification sheet. Options include 2-inch uprights, 2 mm steel thickness, and heavier 13-gauge steel frames. The Megastar Fitness 2x3 Smith Machine uses 2x3 steel construction. Standard 2x3 steel posts provide rigidity for high load stability during guided barbell exercises. Check the published steel tubing specifications to ensure the upright profile matches your stability expectations.
-
Examine Bar Path Tracking
Traditional Smith machines feature a fixed vertical or angled bar path along guide rods. Some lifters prefer guided safety combined with natural barbell freedom. The RitFit 3D Smith Machine offers multi-directional 3D bar travel alongside an integrated selectorized stack. This design allows horizontal movement while maintaining safety stops. If you want fixed isolation paths, standard linear bearing guide rods work best. If you prefer natural bar path mechanics, inspect specifications for multi-directional bar travel.
-
Review Cable Pulley Ratios
Pulley ratios dictate the actual resistance you feel during cable exercises. A 1:1 pulley ratio provides true-to-weight resistance, where 50 pounds on the stack feels like 50 pounds. Dual-ratio cable systems give you smoother travel and extended cable length for functional training and explosive movements. The Major Fitness Drone MAX V Smith Machine includes dual-ratio cable settings. Compare pulley ratio specs to match your movement goals, especially if you alternate between heavy cable work and speed drills.
-
Check Dedicated Station Attachments
Smith machines include distinct station configurations beyond the guided barbell. Look at the included station attachments to ensure your planned exercises are supported. Some units feature integrated lat pulldowns, while others add specialized lower-body stations. For example, the DONOW Smith Machine with Weight Stacks includes a dedicated hip thrust station. If your workout program focuses heavily on specific compound movements, verify which attachments are included in the bundle rather than sold as separate equipment.
Frequently asked questions
What is a 3D Smith machine and how does it work?
A 3D Smith machine allows the barbell to move both vertically and horizontally rather than restricting your movement to a fixed vertical track. The RitFit 3D Smith Machine features this multi-directional bar travel built with 13-gauge steel. This design gives you barbell stability along with a natural lifting path, supported by an included weight bench, integrated selectorized weight stack, and bundled weight plates.
Can two people exercise on a Smith machine at the same time?
Yes, certain multi-station Smith machines support simultaneous training by incorporating independent workout stations. The Megastar Fitness T35 Smith Machine provides dual loading stations engineered so two people can exercise at the exact same time. Its layout combines a 1:1 pulley ratio, smooth linear bearings, and a bundled weight bench, allowing you to split training duties across barbell squats and cable exercises.
What total frame weight capacity should you look for in a Smith machine?
Frame capacities across home gym Smith machines typically range between 1,200 pounds and 2,500 pounds based on steel gauge. The EonfitOmni Power Rack offers a 1,200-pound capacity, whereas the Major Fitness Drone2 and Megastar Fitness P107 provide 2,000-pound limits. For maximum structural support, units like the Major Fitness Drone3 and Goimu Smith Machine deliver frame ratings of up to 2,500 pounds.
Can you perform leg press exercises on a Smith machine with a weight bench?
You can perform dedicated leg presses if the system includes specialized attachments alongside its weight bench. While standard bundled benches focus on chest presses, the MiM USA Hercules Smith Machine includes dedicated leg press and leg extension attachments. This 805-pound heavy-duty unit pairs lower-body training stations with an expansive frame measuring 87 inches wide, 67 inches long, and 91 inches high.
What is the dynamic weight limit on a Smith machine bar?
The dynamic weight capacity measures the maximum barbell load supported during active lifting movements, distinct from the total static frame rating. For example, while structural frames can support upwards of 2,000 pounds, the Major Fitness Drone MAX V specifies a 400-pound dynamic Smith bar capacity. You must check that the dynamic barbell spec accommodates your working weights for squats and bench presses.
How many adjustment positions do uprights provide on plate-loaded Smith machines?
Upright adjustment settings vary significantly across manufacturers, offering anywhere from a few stop catches to fine-tuned spacing. For example, the Goimu Smith Machine features 33 adjustment points along its 2-inch uprights. Having numerous adjustment stops allows you to position safety catches and starting bar heights accurately when aligning the included weight bench for incline presses, flat benching, or squats.
What steel frame dimensions are standard on heavy-duty Smith machines?
Heavy-duty home gym Smith machines typically utilize 2 mm steel, 13-gauge steel, or 2x3-inch upright profiles to support heavy loads. For instance, the Royal Fitness Smith Machine is constructed with 2 mm steel, while the RitFit 3D Smith Machine uses 13-gauge steel. The Megastar Fitness P107 relies on 2x3 steel tubing to support its 2,000-pound total frame capacity.